Products
Food Industrial, Chemical Mills / Grinders / Pulverizers
Turbo Mill
TM Series- Features
- Treatment : Grinder
- Material Properties : Non-Oily
- Fineness : 20mesh ~ 325mesh
- Capacity : 20kg ~ 2000kg / hr
- Production Methods : Turnkey
Introduction
Turbo Mill is different from other kinds of grinders. Raw materials will be ground via the force of cutting, impact, innumerable high speed vortex and high frequency vibratory. Not only the raw materials with tough flexibility and high fiber, but also high heat-sensitivity can be ground completely.- TM Series
- Consistent performance.
- Wear-resistant mechanism.
- Wide range of applications.
- Low maintenance, space-saving design.
- Dust-free operation.
- Fineness: 20 ~ 325Mesh. (data is for reference only & may vary according to raw material)
Oats And Grains Turbo Mill Grinding System-Model : TM-800
Features
Grinding
- To adjust product fineness :
- RPM : Change particle size distribution by adjusting motor speed
- Clearance : Adjust the gap between blades and liners
- Blades : Adjust the number of blades in the rotor
- Feed : Increase or decrease feeding speed
- Air Flow : Adjust the air inlet gate of the Turbo Mill
Principle
The pulverizing mechanism of the Turbo Mill utilizes percussion created by high speed revolution of the wings, ultra-high speed vortexes behind the wings, and high-frequency vibrating air created by these vortexes, along with impact and shearing.Specifications
| Model | Inner da ( mm ) ( inch ) |
Speed ( rpm ) |
Power ( hp ) |
Exhaust air ( m / min ) ( inch ³ ) |
Capacity |
|---|---|---|---|---|---|
| TM-250 | 250, 10'' | 4000~8000 | 15~20 | 5~10, 180~360 | 0.3~0.4 |
| TM-400 | 400, 16" | 2500~4500 | 40~50 | 10~20, 360~720 | 1 |
| TM-600 | 600, 24" | 1750~3000 | 60~75 | 15~30, 540~1080 | 2 |
| TM-800 | 800, 32" | 1500~2200 | 100~125 | 24~40, 720~1440 | 3~4 |
| TM-1000 | 1000, 40" | 1200~2000 | 100~150 | 40~70, 1440~2500 | 5~6 |
