 |
Grinding Principle Instruction |
 |
| |
Rotor |
Stator |
Screen Ring |
Application |
Stud Type |
|
|
|
Brittle materials, and allows exceptionally high grinding fineness to be achieved at a low specific energy consumption. |
Pin Type |
|
|
|
Grains, Beans & SeasoningsKect..(For Exp. : Rice, Green Beans, Sugar, SaltK) |
Knife Type |
|
|
|
High Fiber and Heat Sensitive Raw Materials. (For example : Chinese HerbsK) |
|
|
| PM-3 |
PM-3-C |
|
|
| For FoodStuff,Chemical,Pharmaceutical...etc. |
For Cosmetic |
|
Sugar Grinding / Dust Collecting System |
 |
 |
|
 |
Exhaust Barrel |
|
PM-5 |
|
|
 Application
|
| Foodstuff,Chemical ,Pharmaceutical, Feed, Fertilizer, Mineral Stone , Metal , Ceramics , Gypsum And any solid materials that need to be milled. |
|
|
Feature |
| 1) Multiple use for every kinds of raw materials, durable and low wastage . |
| 2) Easy-operation, it can save time and power, high efficiency. |
| 3) Long life components are easy to be replaced and cleaned. |
|
|
|
|
Flowing Explanation |
| Raw material is fed into grinding room from feeding hopper. The First Grinding is a shearing force caused from the cutter impact in the inner of Rotor and Stator, and so on and so forth, the micro powder will be formed. After filtrating, the powder that smaller than screed mesh will be the products. The bigger powder will be ground in the Third Grinding until the powder can pass through the screen mesh. Finally, all the products will be discharged from the rotary valve. |
|
|
|
| Application |
Model |
Horse Power |
RPM |
Capacity (kg/hr) |
Dimension (m/m) |
Fineness |
| GMP standard |
PM-3-A |
5 |
5000-7500 |
100-200 |
1000*600*1400 |
100-250Mesh |
| PM-4-A |
10 |
4500-6500 |
200-300 |
1100*700*1500 |
| Foodstuff, Chemical grade |
PM-1 |
1 |
3500 |
20-50 |
500*560*1300 |
60-150Mesh |
| PM-3 |
5 |
3500 |
80-250 |
1100*700*1550 |
| PM-4 |
7 1/2 |
3150 |
100-300 |
1200*800*1750 |
| PM-5 |
15-20 |
3000 |
150-500 |
1500*900*2200 |
| PM-6 |
30-40 |
2900 |
300-900 |
1700*1000*2400 |
| PM-7 |
50-60 |
2700 |
500-2000 |
1900*1300*2900 |
| Cosmetic grade |
PM-3-C |
7 1/2HP |
3500 |
200-300 |
1000*860*1200 |
120-200Mesh |
From Floor To Outlet : 450m/m |
|
|
|
| * According to different characteristics, the data would be changed . |
|
No. 171, Zheng Bei 3rd Road, Yung Kang City, Tainan Hsien, Taiwan
Tel:886-6-2545566 Fax:886-6-2538697 mill@mill.com.tw
CopyRight ©2008 All rights reserved. Designed By Ozchamp |
|
|
|
|
