| |
How to choose a ribbon mixer
1. According to the daily output of the selection of ribbon mixer. Mixer as a result of the processing time for each batch of material about 6 minutes, add the feed materials and discharging time, each batch of materials processing time can be 10 minutes total, 1 hour processing can be expected to grant 6.Users can choose ribbon mixer according to their need
2. According to the ribbon mixer with the working principle for stirring mixed with the double helix in the opposite direction to push the material's ability to be in the same. As the spiral with the pitch should be less than the outer spiral bands to push the material's ability to achieve consistent, with the spiral pitch should be less than the outer spiral band, and should be greater than the width of the belt outside the spiral, or materials to make a direction Focus.
3. According to the principles of design, with screw-in mixer with spiral shell with space for between 4 mm to 10 mm, friction materials can lead to participate in all mixed. However, due to crush size and material of different coefficient of friction, it will participate in the various components of the mixed materials are not the same time, resulting in non-uniformity of the product. At present, some manufacturers have been aware of this and improved products. One is the attention to the processing precision, so that by the end of reducing the gap to 1 to 2 mm; the other is the axis between the shell and into position in the form of adjustable, according to the amount of wear and tear can always adjust screw with the gap between the shell. In the choice of mixer, both in the form of the product should be the best choice.
4. Choosing Ribbon mixer Should Pay attention to discharge method. Should choose to open the door in the form of large, do not choose the side or bottom of the small openings in the form of material. The reason is: when the mixer required to complete mixing mixed after a put-money in the shortest possible time to ensure uniformity of materials; such as the mouth or the side of the small openings at the bottom of the spiral with a net release gradually, first, delay time, less than expected Productivity, and the other is this material has reached the best uniformity, over-mixing it will disintegrate materials, the destruction of uniformity, which lost its choice of ribbon mixer.
Ribbon mixer related articls
What is a ribbon mixer?
Basis of ribbon mixer(1)
Basis of ribbon mixer(2)
Ribbon mixer maintenance |
